Battle Arms Development Enhanced Lower Parts Kit – Mod X
$135.00 Add to cart

Battle Arms Development Enhanced Lower Parts Kit – Mod X

$135.00

Want a discount? Become a member!

The AR 15 Battle Arms Development enhanced lower parts kit ensures your AR-15 has the elite look and high-end performance you’ve always wanted for rigorous shooting engagements. This kit contains everything you need to reinvent your weapon, including the BAD-EBC-IC Enhanced Bolt Catch, E4S-IC Single Sided Safety selector, and EMC-IC Magazine Catch and Spring, as well as the BAD-EMR Mag Release, ATG Adjustable Tactical Grip, and a Mil-Spec Trigger Assembly. The AR15 Battle Arms Development lower parts kit from Omaha Outdoors also has all the pins and springs you need to build your lower receiver like a pro, so you’ll be battle-ready in no time.

AD-LPK-PKX Enhanced Complete Lower Parts Kit Includes

 

BAD-EBC-IC Enhanced Bolt Catch

  • Cost friendly alternative
  • Lightweight but Robust Design 0.39oz
  • Compatible with Norgon Ambi-Catch Without Interference
  • Raised “T-Shaped” Heel Provides Positive and Distinctive Control Surface for Bolt Lock Back
  • Bold Horizontal and Diagonal Serrations Provides Positive Purchase
  • 8620 Heat Treated Cast Steel
  • Black Phosphate Finish

BAD-E4S-IC Enhanced Single Sided Safety Selector

  • Based on our famous BAD-ASS Ambidextrous Safety Selector with distinctive and diagonal serrations.
  • Single Side Safety Selector (0°-90° SEMI AUTO)
  • Fit all Mil-Spec Dimensioned AR-15 Lower Receiver
  • Black Phosphate Finish
  • Investment Cast 8620 Heat Treated Steel
  • MADE IN U.S.A.

BAD-EMC-IC Enhanced Magazine Catch

  • Process: Investment Cast (Same Process as Mil-Spec)
  • Material: 8620 Heat Treated Steel Finish: Black Phosphate Finish
  • Construction: One Piece Engineering (Not Two-Piece)
  • Design: Lightweight Fluted Design
  • Compatibility: Compatible with Mil-Spec Magazine Release Button, BAD-EMR, BAD-EMMR, etc.
  • Length: Shorter Threaded Pin to Reduce Installed Magazine Button Profile of Solid Face Magazine Release Buttons
  • Weight: 0.25 oz (v.s. 0.32 oz Mil-Spec)

BAD-EMR Enhanced Magazine Release

  • Precision CNC Machined for billet 7075-T6 Aluminum (not 6061) in an anodized BLACK finish, the BAD-EMR features a unique, fully solid “V” shaped button face with horizontal serrations (no through hole).
  • The concave V-Groove button face offers an excellent ergonomic feel and self-centers the index finger as pressure is applied.  The horizontal, parallel serrations help slippage in the vertical orientation while minimizing drag in the horizontal direction for finger retraction.
  • The BAD-EMR also features a lightweight skeletonized back to offset the weight gained from the fully solid button face and slightly increased height to equal the weight of the standard mil-spec magazine release (approximately 0.002 lbs).
  • BAD-EMR is compatible with all lower receivers that accept mil-spec magazine release buttons.

BAD-ATG™ Adjustable Tactical Grip

  • Adjustable Tactical Grip easily adjusts, with the included hex key, to each of the three most popular industry proven angles (17, 25, & 33 degrees) using the Patent Pending adjustable angle mechanism.
  • The textured finger grooves and ribbed back-strap optimize comfort and provide positive control.
  • Dimpled air gaps help keep hand dry while offering firm grip texture.
  • Only 3.0oz complete with screw and washer!

BAD-EPS Takedown and Pivot Pins:

  • AR15 / M16 / M4 Compatible – Fits all AR15/M16/M4 lower receivers with mil-spec .250in diameter front pivot and rear takedown pin holes.
  • Patent Pending Pivot Pin & Takedown Pin Head Designs – Greatly improved gripping surface and pull strength without the use of oversized heads.
  • Low Profile Pin Heads – Low drag and never in the way. Lower profile than mil-spec pinheads.
  • Ambidextrous Safety Compatible – The Enhanced Takedown Pin (BAD-ETP) head design does not obstruct the use of the right side ambidextrous safety selector lever.
  • Extended Pin Tips (+0.030″ over mil-spec) – Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion.
  • Bullet Tip Guide – Cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver.
  • Patent Pending EZ Guide Channel & Magnetic Assist Install – Easy, hassle-free magnet assisted installation of the EPP (Enhanced Pivot Pin). No more lost detents and springs.
  • Each BAD-EPS comes with (1) BAD-ETP, (1) BAD-EPP, (2) KNS hardened stainless steel detents, (2) 17-7 nickel plated stainless steel pin springs, and (1) high-strength neodymium magnet for hassle-free magnet assisted installation of the Enhanced Pivot Pin (BAD-EPP).
  • Qty 1 Mil-Spec Trigger
  • Qty 1 Mil-Spec Hammer
  • Qty 1 Disconnector
  • Qty 1 Disconnector Spring
  • Qty 1 Hammer Spring
  • Qty 1 Trigger Spring
  • Qty 2 Takedown / Pivot Pin Springs
  • Qty 2 Takedown / Pivot Pin Detents
  • Qty 1 Bolt Catch Detent
  • Qty 1 Bolt Catch Spring
  • Qty 1 Trigger Guard
  • Qty 1 Trigger Guard Roll Pin
  • Qty 2 Hammer / Trigger Pins Mil-Spec
  • Qty 1 Safety Selector Detent
  • Qty 1 Safety Selector Detent Spring
  • Qty 1 Magazine Catch Spring
  • Qty 1 Buffer Retainer Detent
  • Qty 1 Buffer Retainer Detent Spring

Additional information

Weight 11 lbs

Reviews

There are no reviews yet.

Be the first to review “Battle Arms Development Enhanced Lower Parts Kit – Mod X”

Your email address will not be published. Required fields are marked *